Station Control
Five manual insertion stations feeding the Kurtz Ersa wave solder · shift A
Takt 90s
ST 1
A. Kumar
IDLE
Boards Today
0
Efficiency
—
Avg —Target 90s
min —max —
ST 2
S. Reddy
IDLE
Boards Today
0
Efficiency
—
Avg —Target 90s
min —max —
ST 3
M. Iqbal
IDLE
Boards Today
0
Efficiency
—
Avg —Target 90s
min —max —
ST 4
P. Nair
IDLE
Boards Today
0
Efficiency
—
Avg —Target 90s
min —max —
ST 5
R. Das
IDLE
Boards Today
0
Efficiency
—
Avg —Target 90s
min —max —
Station scope and shift tracking
What is inserted where, and how the operator is pacing against the station target
| Station | Operator | Scope | Components | Insertions | Target | Avg | Sec / insertion | Boards | Hands-on | Utilisation |
|---|---|---|---|---|---|---|---|---|---|---|
| ST1 | A. Kumar | Passives — Resistors | Axial resistors, Fusible resistors, Jumpers | 24 | 90s | — | — | 0 | 0m | 0% no cycle yet |
| ST2 | S. Reddy | Passives — Capacitors | Electrolytic caps, Film caps, X/Y safety caps | 18 | 90s | — | — | 0 | 0m | 0% no cycle yet |
| ST3 | M. Iqbal | Semiconductors | Diodes, Bridge rectifier, Transistors, Opto-couplers | 14 | 90s | — | — | 0 | 0m | 0% no cycle yet |
| ST4 | P. Nair | Magnetics & Hardware | Transformer, Chokes, Relays, Terminal blocks | 9 | 90s | — | — | 0 | 0m | 0% no cycle yet |
| ST5 | R. Das | Heat Sink & Camera Inspection | Heat sink, TO-220 devices, Insulation pads, Screws | 7 | 90s | — | — | 0 | 0m | 0% no cycle yet |