Energy Monitoring
Load integrated from live machine states · tariff ₹8.6/kWh
11.6 kW now
Instantaneous load
11.6kW
Wave solder is 82% of it
Energy this shift
0.0kWh
Over 0m
Energy per board
—kWh
0 boards produced
Cost this shift
₹0
Projected full shift
92kWh
At the current load for 8.0 h more
Load mix
Share of the instantaneous line load
Asset breakdown
Live draw per asset group
| Asset | State | Draw | Share | Load |
|---|---|---|---|---|
| Kurtz Ersa ERSA POWERFLOW | standby | 9.50 kW | 82% | |
| Conveyor drives, lifters and line lighting | running | 1.60 kW | 14% | |
| Operator stations (tools, task lights, drivers) | 0 inserting · 5 idle | 0.45 kW | 4% |
Wave solder running21.5 kW
Wave solder heating27 kW
Wave solder standby9.5 kW
Conveyor + lighting1.6 kW
Station inserting0.38 kW
Station idle0.09 kW
Consumption is integrated from the live machine states against the load model in src/lib/config.ts. On a real installation, replace the model with readings from the line's energy meter — publish them on the wave-solder telemetry topic and the same figures become measured rather than modelled.